| Server IP : 82.208.35.60 / Your IP : 216.73.216.238 Web Server : Apache/2.4.55 (FreeBSD) OpenSSL/1.1.1q-freebsd PHP/7.3.31 System : FreeBSD server7.d2m.cz 12.4-RELEASE-p9 FreeBSD 12.4-RELEASE-p9 GENERIC amd64 User : studiokobylisy_cz ( 1008) PHP Version : 7.3.31 Disable Function : NONE MySQL : OFF | cURL : ON | WGET : OFF | Perl : OFF | Python : OFF | Sudo : OFF | Pkexec : OFF Directory : /usr/ports/sysutils/u-boot-utilite/ |
Upload File : |
U-Boot loader for Utilite and Utilite Pro Install the cm-fx6-firmware file onto the boot disk using: dd if=cm-fx6-firmware of=/dev/whatever bs=1k skip=1 seek=1 oflag=dsync The U-Boot built by this port expects the first 1MB of the boot media to be reserved for the U-Boot executable and saved environment. The firmware file begins at an offset of 1K from the start of the boot disk. The U-Boot environment area begins at an offset of 512K. This version is patched so that: * ELF and API features are enabled to support ubldr. * A single U-Boot image supports Utilite and Utilite Pro. * When the selected board has multiple SD or MMC devices available, the mmc0 device in U-Boot (and thus the disk0 device in loader(8)) will be whichever device U-Boot was loaded from by the ROM bootloader routines. The sources for this port are based on stock U-Boot 2015.07 with patches provided by CompuLab at: http://www.compulab.co.il/wp-content/uploads/2015/10/u-boot-2015.07.tar.bz2 For general information about U-Boot see https://www.denx.de/wiki/U-Boot