--- lib/Image/ppport.h.orig	Sun Apr  9 20:45:22 2000
+++ lib/Image/ppport.h	Tue Mar 30 18:36:57 2004
@@ -1,57 +1,81 @@
 
-#ifndef _P_P_PORTABILITY_H_
-#define _P_P_PORTABILITY_H_
-
-/* Perl/Pollution/Portability Version 1.0007 */
-
-/* Copyright (C) 1999, Kenneth Albanowski. This code may be used and
-   distributed under the same license as any version of Perl. */
-   
-/* For the latest version of this code, please retreive the Devel::PPPort
-   module from CPAN, contact the author at <kjahds@kjahds.com>, or check
-   with the Perl maintainers. */
-   
-/* If you needed to customize this file for your project, please mention
-   your changes, and visible alter the version number. */
-
+/* ppport.h -- Perl/Pollution/Portability Version 2.0002 
+ *
+ * Automatically Created by Devel::PPPort on Tue Mar 30 18:36:57 2004 
+ *
+ * Do NOT edit this file directly! -- Edit PPPort.pm instead.
+ *
+ * Version 2.x, Copyright (C) 2001, Paul Marquess.
+ * Version 1.x, Copyright (C) 1999, Kenneth Albanowski.
+ * This code may be used and distributed under the same license as any
+ * version of Perl.
+ * 
+ * This version of ppport.h is designed to support operation with Perl
+ * installations back to 5.004, and has been tested up to 5.8.0.
+ *
+ * If this version of ppport.h is failing during the compilation of this
+ * module, please check if a newer version of Devel::PPPort is available
+ * on CPAN before sending a bug report.
+ *
+ * If you are using the latest version of Devel::PPPort and it is failing
+ * during compilation of this module, please send a report to perlbug@perl.com
+ *
+ * Include all following information:
+ *
+ *  1. The complete output from running "perl -V"
+ *
+ *  2. This file.
+ *
+ *  3. The name & version of the module you were trying to build.
+ *
+ *  4. A full log of the build that failed.
+ *
+ *  5. Any other information that you think could be relevant.
+ *
+ *
+ * For the latest version of this code, please retreive the Devel::PPPort
+ * module from CPAN.
+ * 
+ */
 
 /*
-   In order for a Perl extension module to be as portable as possible
-   across differing versions of Perl itself, certain steps need to be taken.
-   Including this header is the first major one, then using dTHR is all the
-   appropriate places and using a PL_ prefix to refer to global Perl
-   variables is the second.
-*/
+ * In order for a Perl extension module to be as portable as possible
+ * across differing versions of Perl itself, certain steps need to be taken.
+ * Including this header is the first major one, then using dTHR is all the
+ * appropriate places and using a PL_ prefix to refer to global Perl
+ * variables is the second.
+ *
+ */
 
 
 /* If you use one of a few functions that were not present in earlier
-   versions of Perl, please add a define before the inclusion of ppport.h
-   for a static include, or use the GLOBAL request in a single module to
-   produce a global definition that can be referenced from the other
-   modules.
-   
-   Function:            Static define:           Extern define:
-   newCONSTSUB()        NEED_newCONSTSUB         NEED_newCONSTSUB_GLOBAL
-
-*/
+ * versions of Perl, please add a define before the inclusion of ppport.h
+ * for a static include, or use the GLOBAL request in a single module to
+ * produce a global definition that can be referenced from the other
+ * modules.
+ * 
+ * Function:            Static define:           Extern define:
+ * newCONSTSUB()        NEED_newCONSTSUB         NEED_newCONSTSUB_GLOBAL
+ *
+ */
  
 
 /* To verify whether ppport.h is needed for your module, and whether any
-   special defines should be used, ppport.h can be run through Perl to check
-   your source code. Simply say:
-   
-   	perl -x ppport.h *.c *.h *.xs foo/*.c [etc]
-   
-   The result will be a list of patches suggesting changes that should at
-   least be acceptable, if not necessarily the most efficient solution, or a
-   fix for all possible problems. It won't catch where dTHR is needed, and
-   doesn't attempt to account for global macro or function definitions,
-   nested includes, typemaps, etc.
-   
-   In order to test for the need of dTHR, please try your module under a
-   recent version of Perl that has threading compiled-in.
- 
-*/ 
+ * special defines should be used, ppport.h can be run through Perl to check
+ * your source code. Simply say:
+ * 
+ * 	perl -x ppport.h *.c *.h *.xs foo/bar*.c [etc]
+ * 
+ * The result will be a list of patches suggesting changes that should at
+ * least be acceptable, if not necessarily the most efficient solution, or a
+ * fix for all possible problems. It won't catch where dTHR is needed, and
+ * doesn't attempt to account for global macro or function definitions,
+ * nested includes, typemaps, etc.
+ * 
+ * In order to test for the need of dTHR, please try your module under a
+ * recent version of Perl that has threading compiled-in.
+ *
+ */ 
 
 
 /*
@@ -141,6 +165,9 @@
 __DATA__
 */
 
+#ifndef _P_P_PORTABILITY_H_
+#define _P_P_PORTABILITY_H_
+
 #ifndef PERL_REVISION
 #   ifndef __PATCHLEVEL_H_INCLUDED__
 #       include "patchlevel.h"
@@ -157,33 +184,109 @@
 
 #define PERL_BCDVERSION ((PERL_REVISION * 0x1000000L) + (PERL_VERSION * 0x1000L) + PERL_SUBVERSION)
 
+/* It is very unlikely that anyone will try to use this with Perl 6 
+   (or greater), but who knows.
+ */
+#if PERL_REVISION != 5
+#	error ppport.h only works with Perl version 5
+#endif /* PERL_REVISION != 5 */
+
 #ifndef ERRSV
 #	define ERRSV perl_get_sv("@",FALSE)
 #endif
 
 #if (PERL_VERSION < 4) || ((PERL_VERSION == 4) && (PERL_SUBVERSION <= 5))
 /* Replace: 1 */
-#	define PL_sv_undef	sv_undef
-#	define PL_sv_yes	sv_yes
-#	define PL_sv_no		sv_no
-#	define PL_na		na
-#	define PL_stdingv	stdingv
-#	define PL_hints		hints
+#	define PL_Sv		Sv
+#	define PL_compiling	compiling
+#	define PL_copline	copline
 #	define PL_curcop	curcop
 #	define PL_curstash	curstash
-#	define PL_copline	copline
-#	define PL_Sv		Sv
+#	define PL_defgv		defgv
+#	define PL_dirty		dirty
+#	define PL_dowarn	dowarn
+#	define PL_hints		hints
+#	define PL_na		na
+#	define PL_perldb	perldb
+#	define PL_rsfp_filters	rsfp_filters
+#	define PL_rsfpv		rsfp
+#	define PL_stdingv	stdingv
+#	define PL_sv_no		sv_no
+#	define PL_sv_undef	sv_undef
+#	define PL_sv_yes	sv_yes
 /* Replace: 0 */
 #endif
 
+#ifdef HASATTRIBUTE
+#  if defined(__GNUC__) && defined(__cplusplus)
+#    define PERL_UNUSED_DECL
+#  else
+#    define PERL_UNUSED_DECL __attribute__((unused))
+#  endif
+#else
+#  define PERL_UNUSED_DECL
+#endif
+
+#ifndef dNOOP
+#  define NOOP (void)0
+#  define dNOOP extern int Perl___notused PERL_UNUSED_DECL
+#endif
+
 #ifndef dTHR
-#  ifdef WIN32
-#	define dTHR extern int Perl___notused
+#  define dTHR          dNOOP
+#endif
+
+#ifndef dTHX
+#  define dTHX          dNOOP
+#  define dTHXa(x)      dNOOP
+#  define dTHXoa(x)     dNOOP
+#endif
+
+#ifndef pTHX
+#    define pTHX	void
+#    define pTHX_
+#    define aTHX
+#    define aTHX_
+#endif         
+
+#ifndef UVSIZE
+#   define UVSIZE IVSIZE
+#endif
+
+#ifndef NVTYPE
+#   if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE)
+#       define NVTYPE long double
+#   else
+#       define NVTYPE double
+#   endif
+typedef NVTYPE NV;
+#endif
+
+#ifndef INT2PTR
+
+#if (IVSIZE == PTRSIZE) && (UVSIZE == PTRSIZE)
+#  define PTRV                  UV
+#  define INT2PTR(any,d)        (any)(d)
+#else
+#  if PTRSIZE == LONGSIZE
+#    define PTRV                unsigned long
 #  else
-#	define dTHR extern int errno
+#    define PTRV                unsigned
 #  endif
+#  define INT2PTR(any,d)        (any)(PTRV)(d)
+#endif
+#define NUM2PTR(any,d)  (any)(PTRV)(d)
+#define PTR2IV(p)       INT2PTR(IV,p)
+#define PTR2UV(p)       INT2PTR(UV,p)
+#define PTR2NV(p)       NUM2PTR(NV,p)
+#if PTRSIZE == LONGSIZE
+#  define PTR2ul(p)     (unsigned long)(p)
+#else
+#  define PTR2ul(p)     INT2PTR(unsigned long,p)        
 #endif
 
+#endif /* !INT2PTR */
+
 #ifndef boolSV
 #	define boolSV(b) ((b) ? &PL_sv_yes : &PL_sv_no)
 #endif
@@ -202,6 +305,15 @@
 /* Replace: 0 */
 #endif
 
+/* DEFSV appears first in 5.004_56 */
+#ifndef DEFSV
+#  define DEFSV	GvSV(PL_defgv)
+#endif
+
+#ifndef SAVE_DEFSV
+#    define SAVE_DEFSV SAVESPTR(GvSV(PL_defgv))
+#endif
+
 #ifndef newRV_noinc
 #  ifdef __GNUC__
 #    define newRV_noinc(sv)               \
@@ -211,7 +323,7 @@
           nsv;                            \
       })
 #  else
-#    if defined(CRIPPLED_CC) || defined(USE_THREADS)
+#    if defined(USE_THREADS)
 static SV * newRV_noinc (SV * sv)
 {
           SV *nsv = (SV*)newRV(sv);       
@@ -220,7 +332,7 @@
 }
 #    else
 #      define newRV_noinc(sv)    \
-        ((PL_Sv=(SV*)newRV(sv), SvREFCNT_dec(sv), (SV*)PL_Sv)
+        (PL_Sv=(SV*)newRV(sv), SvREFCNT_dec(sv), (SV*)PL_Sv)
 #    endif
 #  endif
 #endif
@@ -233,7 +345,7 @@
 #if defined(NEED_newCONSTSUB)
 static
 #else
-extern void newCONSTSUB _((HV * stash, char * name, SV *sv));
+extern void newCONSTSUB(HV * stash, char * name, SV *sv);
 #endif
 
 #if defined(NEED_newCONSTSUB) || defined(NEED_newCONSTSUB_GLOBAL)
@@ -282,5 +394,147 @@
 
 #endif /* newCONSTSUB */
 
+#ifndef START_MY_CXT
+
+/*
+ * Boilerplate macros for initializing and accessing interpreter-local
+ * data from C.  All statics in extensions should be reworked to use
+ * this, if you want to make the extension thread-safe.  See ext/re/re.xs
+ * for an example of the use of these macros.
+ *
+ * Code that uses these macros is responsible for the following:
+ * 1. #define MY_CXT_KEY to a unique string, e.g. "DynaLoader_guts"
+ * 2. Declare a typedef named my_cxt_t that is a structure that contains
+ *    all the data that needs to be interpreter-local.
+ * 3. Use the START_MY_CXT macro after the declaration of my_cxt_t.
+ * 4. Use the MY_CXT_INIT macro such that it is called exactly once
+ *    (typically put in the BOOT: section).
+ * 5. Use the members of the my_cxt_t structure everywhere as
+ *    MY_CXT.member.
+ * 6. Use the dMY_CXT macro (a declaration) in all the functions that
+ *    access MY_CXT.
+ */
+
+#if defined(MULTIPLICITY) || defined(PERL_OBJECT) || \
+    defined(PERL_CAPI)    || defined(PERL_IMPLICIT_CONTEXT)
+
+/* This must appear in all extensions that define a my_cxt_t structure,
+ * right after the definition (i.e. at file scope).  The non-threads
+ * case below uses it to declare the data as static. */
+#define START_MY_CXT
+
+#if (PERL_VERSION < 4 || (PERL_VERSION == 4 && PERL_SUBVERSION < 68 ))
+/* Fetches the SV that keeps the per-interpreter data. */
+#define dMY_CXT_SV \
+	SV *my_cxt_sv = perl_get_sv(MY_CXT_KEY, FALSE)
+#else /* >= perl5.004_68 */
+#define dMY_CXT_SV \
+	SV *my_cxt_sv = *hv_fetch(PL_modglobal, MY_CXT_KEY,		\
+				  sizeof(MY_CXT_KEY)-1, TRUE)
+#endif /* < perl5.004_68 */
+
+/* This declaration should be used within all functions that use the
+ * interpreter-local data. */
+#define dMY_CXT	\
+	dMY_CXT_SV;							\
+	my_cxt_t *my_cxtp = INT2PTR(my_cxt_t*,SvUV(my_cxt_sv))
+
+/* Creates and zeroes the per-interpreter data.
+ * (We allocate my_cxtp in a Perl SV so that it will be released when
+ * the interpreter goes away.) */
+#define MY_CXT_INIT \
+	dMY_CXT_SV;							\
+	/* newSV() allocates one more than needed */			\
+	my_cxt_t *my_cxtp = (my_cxt_t*)SvPVX(newSV(sizeof(my_cxt_t)-1));\
+	Zero(my_cxtp, 1, my_cxt_t);					\
+	sv_setuv(my_cxt_sv, PTR2UV(my_cxtp))
+
+/* This macro must be used to access members of the my_cxt_t structure.
+ * e.g. MYCXT.some_data */
+#define MY_CXT		(*my_cxtp)
+
+/* Judicious use of these macros can reduce the number of times dMY_CXT
+ * is used.  Use is similar to pTHX, aTHX etc. */
+#define pMY_CXT		my_cxt_t *my_cxtp
+#define pMY_CXT_	pMY_CXT,
+#define _pMY_CXT	,pMY_CXT
+#define aMY_CXT		my_cxtp
+#define aMY_CXT_	aMY_CXT,
+#define _aMY_CXT	,aMY_CXT
+
+#else /* single interpreter */
+
+
+#define START_MY_CXT	static my_cxt_t my_cxt;
+#define dMY_CXT_SV	dNOOP
+#define dMY_CXT		dNOOP
+#define MY_CXT_INIT	NOOP
+#define MY_CXT		my_cxt
+
+#define pMY_CXT		void
+#define pMY_CXT_
+#define _pMY_CXT
+#define aMY_CXT
+#define aMY_CXT_
+#define _aMY_CXT
+
+#endif 
+
+#endif /* START_MY_CXT */
+
+#ifndef IVdf
+#  if IVSIZE == LONGSIZE
+#       define	IVdf		"ld"
+#       define	UVuf		"lu"
+#       define	UVof		"lo"
+#       define	UVxf		"lx"
+#       define	UVXf		"lX"
+#   else
+#       if IVSIZE == INTSIZE
+#           define	IVdf	"d"
+#           define	UVuf	"u"
+#           define	UVof	"o"
+#           define	UVxf	"x"
+#           define	UVXf	"X"
+#       endif
+#   endif
+#endif
+
+#ifndef NVef
+#   if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE) && \
+	defined(PERL_PRIfldbl) /* Not very likely, but let's try anyway. */ 
+#       define NVef		PERL_PRIeldbl
+#       define NVff		PERL_PRIfldbl
+#       define NVgf		PERL_PRIgldbl
+#   else
+#       define NVef		"e"
+#       define NVff		"f"
+#       define NVgf		"g"
+#   endif
+#endif
+
+#ifndef AvFILLp			/* Older perls (<=5.003) lack AvFILLp */
+#   define AvFILLp AvFILL
+#endif
+
+#ifdef SvPVbyte
+#   if PERL_REVISION == 5 && PERL_VERSION < 7
+       /* SvPVbyte does not work in perl-5.6.1, borrowed version for 5.7.3 */
+#       undef SvPVbyte
+#       define SvPVbyte(sv, lp) \
+          ((SvFLAGS(sv) & (SVf_POK|SVf_UTF8)) == (SVf_POK) \
+           ? ((lp = SvCUR(sv)), SvPVX(sv)) : my_sv_2pvbyte(aTHX_ sv, &lp))
+       static char *
+       my_sv_2pvbyte(pTHX_ register SV *sv, STRLEN *lp)
+       {   
+           sv_utf8_downgrade(sv,0);
+           return SvPV(sv,*lp);
+       }
+#   endif
+#else
+#   define SvPVbyte SvPV
+#endif
 
 #endif /* _P_P_PORTABILITY_H_ */
+
+/* End of File ppport.h */